|
|
MIL-TEK BALER MODEL 509HD FOR CARDBOARD AND PLASTIC
The new heavy duty model 509 is the perfect solution for dealing with large volumes of cardboard and/or plastic, particularly when space is a premium.
 
Despite its small footprint, the 509 can produce a bale of approximately 400 kg replacing the larger Mill Size baler.
Bale both waste streams by storing plastic packaging in plastic bag stand, then load full bags into the baler once cardboard bale has been made.
The bales fit perfectly onto a standard pallet allowing for simple and safe storage and transportation.
BALER MODEL 509 VIDEO SOLUTIONS
CARDBOARD
The wide door opening of the 509 baler is perfect for loading large cardboard boxes. The baler has a safe and easy bale out system, the 300kg bales can be stored and transported on a standard euro pallet ensuring efficient waste handling and maximising income potential.
PLASTIC
Using constant pressure, the air powered 509 baler can create heavy dense bales of plastic weighing approximately 400kg, maximising both storage space, transportation and revenue. Use the Mil-tek plastic Bag Stand Model 240L to store plastic whilst baling cardboard in the 509 baler and bale both waste streams in one baler.
The Model 509HD is an Air Powered Baler equipped with the new world patent ECOdrive low energy system reducing the balers energy consumption by up to 60%.
SOLUTIONS
RETAIL/CONVENIENCE
Stockroom space is often restricted and waste storage can take up valuable square footage. The Mil-tek 509 baler can be placed inside or outside enabling retailers to maximise available floor space. By placing the baler close to the unpacking area, valuable time can be saved by loading whole boxes or plastic packaging directly into the baler.
IMPROVE LOGISTICS
The 509 baler accompanied by a smaller plastic baler and strategically placed plastic bag stands, can vastly improve logistics where a steady stream of packaging waste is created in multiple areas. The modern waste technique of segregating and baling packaging waste using strategically placed recycling points, has resulted in an increase in productivity across a range of businesses.
WHOLESALE / MANUFACTURING / INDUSTRY
The deep chamber and wide aperture of the 509 baler means large volumes of cardboard can be baled without the need for breaking down or flat packing. Plastic packaging stored in Mil-tek plastic bag stands can be placed directly into the baler saving time and therefore cost when dealing with packaging waste.
TECHNICAL DATA - BALER MODEL 509
| HEIGHT |
2495 mm |
| WIDTH |
1400 mm |
| DEPTH |
1040 mm |
| WEIGHT |
925 kg |
| DOOR OPENING |
H: 480 mm |
| W: 1250 mm |
| D: 800 mm |
| PRESSURE |
8500 kg at 8 bar |
| BALE WEIGHT |
Plastic: < 400 kg |
| Cardboard: < 300 kg |
| BALE SIZE |
H: 875 mm |
| W: 1250 mm |
| D: 830 mm |
| DEGREE OF COMPRESSION |
85 - 90% |
| NOISE LEVEL |
< 70 dB |
| APPROVAL |
CE |
| DOWNLOAD BROCHURE |
(664 KB |
|
