Strong: high compaction pressure
Electric: quiet & free from hydraulics
Low: total machine height less than 2m
Constant Pressure: locks pressing plate in place
Easy-open: user-friendly door for simple loading
Specialist: designed for high volumes of soft plastic
The Electric E519 is a quiet-running electro-mechanical baler optimized to compact large volumes of plastic. Featuring no hydraulics and running on a spindle-driven pressing plate, the E519 quietly compacts waste material with up to 18 tonnes of pressing force.With a total height of less than 2m, the E519 can easily be installed in most locations, and can operate quietly without causing noise disruption. The walls of the E519 electric baler are designed to handle large volumes of densely compacted plastic without buckling. Several hooks are built into the chamber walls to hold the plastic in place. A simple control system activates the pressing cycle, and is used to control additional functions such as 'auto-start' and 'constant pressure' which locks the pressing plate in place to further compact material, without any additional electrical use.In accordance with EN16500 safety standards, the E519 features a magnetic safety switch, inductive sensors and additional safety elements to protect users.
E619 Video: Open the top door and start filling the electric baler with waste plastic. To activate it, simply close the door, and push the button!
A Mil-tek technician will conduct the installation, ensure your E519 is optimally placed to suit the workflow. The E519 requires a 3-phase electrical connection.
The doors of E519 feature two hydraulic arms for easy opening, and the wide opening allows for easy loading of large volumes of plastic
The E519 is activated manually via the control panel or can be set to automatically start when the door closes. Please refer to the user manual for detailed instructions
Yes, it is. The E519 is designed in full compliance with EN16500 safety standards. In addition to this, Mil-tek has ISO 14001 and ISO 9001 certification.
Not exclusively. The E519 is suitable for several different types of waste, though it has the design is oriented towards plastic compaction. The walls of the chamber are designed to withstand the high pressure of compressed plastic and feature hooks to hold the compressed material in place.
The banding for the E519 is housed above the pressing plate, which can be accessed via a panel. Simply lift the panel to change the banding. The E519 uses 250m rolls of 13mm banding.
Hold down the blue button for 10 seconds until the light blinks. One blink means 'constant press' is activated, two blinks mean it is deactivated. For more detailed instructions, refer to your user manual.
The E519 is suitable for medium and large supermarkets, handling large volumes of packaging plastic. The low height of the machine makes for easy installation and the wide door opening makes it easy to load large volumes of waste at an optimal working height.
The machine features an easy-opening door and a simple, modern control panel, making it accessible to all staff.
An electrical baler like the E519 is an ideal addition to warehouses and locations that do not have an existing source of compressed air.
As it operates without mechanical hydraulics, the E519 operates quietly without causing noise interference. The wide door opening means it can handle large amounts of plastic to maximize on-site segregation and recycling.
The E519 baler is suitable for manufacturing facilities handling large volumes of plastic but where compressed air is not readily accessible.
Featuring a wide door opening, low working height and low noise level, the E519 can greatly assist on-site segregation, increase recycling and reduce carbon footprint.
|Bale weight||Plastic: <230kg|
|Degree of Compression||85-90%|
|Noise level||<65 dB(A)|