Optimal working height
Paint oil and hazardous fluids
Low noise, low energy, durable
Compact cans, drums & tins up to 30L
Many tins and cans contain hazardous waste such as oil or paint, the removal of which can be very expensive. The Mil-tek 2101 Can Press will reduce the volume of cans and tins by up to 90%, allowing you to reduce the amount of hazardous waste bins, the number of lifts required and, most importantly, reduce your costs by up to 80%.Containing no electrical parts, the small size, heavy-duty Mil-tek 2101 Can Press is both easy to maintain and easy to clean. It can compress metal, steel, tin, aluminium - almost any form of non-aerosol can up to 30L in size.The 2101 Can Press is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Can Press is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination.
The University of Mary Washington is a liberal arts and sciences university in Virginia. They partner with Sodexo to manage their waste. Sodexo opted for a Can Crusher to facilitate easy compaction and transportation food cans.
Hörby Paint Shop is an auto paint shop and bodywork shop in Sweden. The 101 Can Press helps to reduce the cost of refuse and eliminates the need to rent a container.
Rosenlunds Vårdcentral is a hospital in central Stockholm. They use a hygienic 101 Can Press to reduce the volume of waste produced.
A Mil-tek technician will guide you through installation, which is done by simply connecting your 2101 Can Press to a compressed air supply. You are now ready to start minimizing.
Place an empty tin upright into the machine. The 2101 Can Press can handle cans, tins and drums up to 30 litres in size.
To activate the can press, firmly close the door and pull down the activation handle. This activates the pressing cycle, which takes around 7-10 seconds.
Anything up to 30 litres in volume: Cans, drums and tins, anything except pressurised/aerosol cans.
As the 2101S Can Crusher is stainless steel, it is not necessary to clean out cans before they are compacted. However, in order to maximise the life span of the machine, it is advised that you rinse cans in cold water before compacting them. This will in turn reduce the need to clean the machine.
The 2101S Can Compactor is powered exclusively by compressed air, making it ideal for the shipping and offshore industry. This also means that it is free of hydraulic oil, electrical components, or any other inbuilt fire hazard. Patented ECODrive technology ensures that the can crusher only uses the required amount of energy with each cycle.
Up to 90% for most cans, tins and drums. This makes storing waste significantly easier, and also facilitates aluminium recycling for correctly managed waste that is brought ashore.
Many food products are packaged in metal tins and cans that, once empty, take up valuable space in bins. Using a Mil-tek 2101 Can Press to compact the used cans will reduce volume by 90%.
The Mil-tek 2101 Can Press is air-powered meaning that not only is it quiet, there is also no risk of oil contamination. These two key factors mean that it can safely be placed in a hygienic environment where food is prepared.
Empty paint and oil cans are full of air and take up unnecessary space in bins. A Mil-tek 2101 Can Press will reduce the volume of empty cans by 90% and can run from an existing air-line or a supplied compressor, reducing running costs and improving energy consumption.
The high-quality enamel finish also ensures the can press is not affected by hazardous liquid like paint or car oil.
The air powered Mil-tek 2101 Can Press is the ideal solution for compressing cans and metal food containers in the Hospital environment. The Mil-tek 2101 Can Press is air-powered meaning that not only is it quiet, there is also no risk of oil contamination. These two key factors mean that it can safely be placed in a hygienic environment where food is prepared.
|Capacity||Cans: <30 L.|
|Degree of Compression||85-90%|
|Noise level||<70 dB (A)|
|Pressure||2250 kg at 8 bar|